NetToggle 1.2.0
5G network control with custom Quick Settings cycles, shortcuts and automation
Download
0.27 MB
23downloads
1this week
FreeFreeware
0reviews
About NetToggle
NetToggle is a lightweight Android Quick Settings (QS) tile app for cellular network control. Create custom tile cycles, target one or both SIMs, build shortcuts, secure broadcast automation, and troubleshoot failures with detailed diagnostics.
? NETWORK MODES
o Preferred 5G (5G/4G/3G/2G): Recommended for daily use. Allows 5G SA and NSA, including UW, UC, 5G+, or 5G++ where supported, with LTE and legacy fallback.
o 5G Only (NR Only): Disables 4G, 3G, and 2G. Intended for 5G SA networks. Service and calls may fail on NSA networks or without SA and VoNR.
o Preferred 4G (4G/3G/2G): Disables 5G while retaining LTE and legacy fallback. Useful for battery saving, reduced heat, or unstable 5G.
o 4G Only (LTE/LTE-A): Locks to LTE without 3G/2G fallback. Calls require VoLTE; carrier aggregation is controlled by the modem and network.
o Preferred 3G (3G/2G): Disables 4G and 5G while allowing supported 3G and 2G networks.
o 2G Only (GSM/EDGE): Locks to 2G where legacy service remains available.
If calls or service fail in an Only mode, return to Preferred 5G or Preferred 4G.
QUICK TILE CYCLE
o Custom Sequence: Choose an ordered cycle of 2 or 3 modes.
o Live State: Shows the active mode with an Auto, SIM 1, SIM 2, or Both badge.
o Auto Restore: Optionally restores the last selected mode if Android, thermal management, or the carrier changes it.
o Efficient Refresh: Controlled checks avoid continuous polling.
TARGET SIM
o Auto: Resolves the active data subscription and physical SIM slot.
o SIM 1 or SIM 2: Applies changes to the selected SIM.
o Both SIMs: Offers mutually supported modes, applies changes to both, and reports partial failures.
If Auto detection fails, select a SIM manually.
SHORTCUTS & ROUTINES
Create up to 4 capability-aware actions with custom names, modes, and SIM targets. Use app shortcuts, pin actions, or integrate with supported OEM routines.
BROADCAST AUTOMATION
Integrate with Tasker, MacroDroid, Automate, and similar tools. External automation is disabled by default and requires opt-in.
REQUIREMENTS & PERMISSIONS
o Root or Shizuku Required: Either must be active and authorized. Shizuku is recommended and can run through Root, ADB, or Wireless Debugging. Trusted forks may add start on boot, watchdog, or TCP mode. Root supports Magisk, KernelSU, APatch, and compatible su solutions.
o Read Phone State: Optional permission for faster native SIM and capability detection. Without it, privileged shell fallbacks are used where available.
o Run at Startup: Briefly clears stale tile state after boot or app update. No persistent background service is used.
Some root managers require manual authorization. Shizuku users must authorize NetToggle.
SMART CAPABILITY FILTERING
Evaluates device, SIM, and carrier information to hide unsupported modes. Both-SIM operation offers mutually supported modes. A registry helps hide legacy options on known 2G/3G sunset networks.
DESIGN & THEMES
Portrait and landscape layouts include guided setup and Auto, Light, Dark, and AMOLED themes.
DIAGNOSTICS
Copyable reports include commands, exit codes, output, exceptions, execution state, and SIM resolution.
COMPATIBILITY
Supports Android 7.0 and newer. Availability varies by Android version, OEM, ROM, modem, SIM, local network, and carrier.
PRIVACY
o No advertisements, analytics, telemetry, or trackers.
o No Internet permission or transmission of user data.
License: GPL-3.0-only
? NETWORK MODES
o Preferred 5G (5G/4G/3G/2G): Recommended for daily use. Allows 5G SA and NSA, including UW, UC, 5G+, or 5G++ where supported, with LTE and legacy fallback.
o 5G Only (NR Only): Disables 4G, 3G, and 2G. Intended for 5G SA networks. Service and calls may fail on NSA networks or without SA and VoNR.
o Preferred 4G (4G/3G/2G): Disables 5G while retaining LTE and legacy fallback. Useful for battery saving, reduced heat, or unstable 5G.
o 4G Only (LTE/LTE-A): Locks to LTE without 3G/2G fallback. Calls require VoLTE; carrier aggregation is controlled by the modem and network.
o Preferred 3G (3G/2G): Disables 4G and 5G while allowing supported 3G and 2G networks.
o 2G Only (GSM/EDGE): Locks to 2G where legacy service remains available.
If calls or service fail in an Only mode, return to Preferred 5G or Preferred 4G.
QUICK TILE CYCLE
o Custom Sequence: Choose an ordered cycle of 2 or 3 modes.
o Live State: Shows the active mode with an Auto, SIM 1, SIM 2, or Both badge.
o Auto Restore: Optionally restores the last selected mode if Android, thermal management, or the carrier changes it.
o Efficient Refresh: Controlled checks avoid continuous polling.
TARGET SIM
o Auto: Resolves the active data subscription and physical SIM slot.
o SIM 1 or SIM 2: Applies changes to the selected SIM.
o Both SIMs: Offers mutually supported modes, applies changes to both, and reports partial failures.
If Auto detection fails, select a SIM manually.
SHORTCUTS & ROUTINES
Create up to 4 capability-aware actions with custom names, modes, and SIM targets. Use app shortcuts, pin actions, or integrate with supported OEM routines.
BROADCAST AUTOMATION
Integrate with Tasker, MacroDroid, Automate, and similar tools. External automation is disabled by default and requires opt-in.
REQUIREMENTS & PERMISSIONS
o Root or Shizuku Required: Either must be active and authorized. Shizuku is recommended and can run through Root, ADB, or Wireless Debugging. Trusted forks may add start on boot, watchdog, or TCP mode. Root supports Magisk, KernelSU, APatch, and compatible su solutions.
o Read Phone State: Optional permission for faster native SIM and capability detection. Without it, privileged shell fallbacks are used where available.
o Run at Startup: Briefly clears stale tile state after boot or app update. No persistent background service is used.
Some root managers require manual authorization. Shizuku users must authorize NetToggle.
SMART CAPABILITY FILTERING
Evaluates device, SIM, and carrier information to hide unsupported modes. Both-SIM operation offers mutually supported modes. A registry helps hide legacy options on known 2G/3G sunset networks.
DESIGN & THEMES
Portrait and landscape layouts include guided setup and Auto, Light, Dark, and AMOLED themes.
DIAGNOSTICS
Copyable reports include commands, exit codes, output, exceptions, execution state, and SIM resolution.
COMPATIBILITY
Supports Android 7.0 and newer. Availability varies by Android version, OEM, ROM, modem, SIM, local network, and carrier.
PRIVACY
o No advertisements, analytics, telemetry, or trackers.
o No Internet permission or transmission of user data.
License: GPL-3.0-only
| Release info | New Release on Sep 16, 2026 |
|---|---|
| Release notes | - Completely redesigned NetToggle with fluid animations and pill navigation across Home, Automate, and Guide - Added secure Tasker, MacroDroid, and Automate broadcasts - Added up to 4 customizable routine and launcher shortcuts - Added Both-SIM targeting, capability intersection along with Auto, SIM 1, SIM 2 - Added Auto Restore and SIM badges for the QS tile - Improved Shizuku lifecycle handling and diagnostics - Added Bengali, Chinese, Portuguese, Russian, and Spanish translations |
| Listing data | F-Droid |
Reviews
No reviews yet. Be the first to review NetToggle.
Used NetToggle? Tell other visitors what you thought.
Log in to write a reviewOther products by this publisher
- "No Distractions" for YouTube 4.10 ----
- #Bible 11.6.1 "Incredible App - My sister shared this app with me a few weeks ago and it is truly incredible.
- #filmphotography 1.4.2 So, you decided to shoot on film?
- $quirrel 1.5.1 $quirrel Budget & Finance helps you plan each paycheck, track spending, manage debt, and see what is safe to spend before the next payday.
- % Percentage Calculator Pro 1.41 This is the Pro version of % Percentage Calculator.
Most viewed Android Connectivity
- 1 XrayFA 1.7.4 XrayFA is a fast, secure, and user-friendly Android client for Xray-core.
- 2 Device Connect 0.12.1 Yet another tool to connect Android phone with desktop
-
3
Pulse 0.99.0-pulse
Garmin watch companion — your data stays on your phone
-
4
Airplane Scheduler 3.0
Automatically switch airplane mode on a schedule
- 5 Inkcast 0.0.1 The companion app for Xteink X4 CrossPoint Reader
-
6
AwakeOnLANMobile 1.0.2
Send WakeOnLAN packets (IPv4/IPv6) over the internet, includes a CIDR scanner
- 7 getgovroam 2.3.2(2696) Configure the govroam Wi-Fi network securely and correctly
- 8 Flashbyte 3.1.4 A fast cross-platform file sharing app.
- 9 JMP SIM Manager jmp-v1.7.2 Companion app for the JMP eSIM Adapter
-
10
FocusMastodon 2.12.0.20240624
FocusMastodon is a bright and colourful Mastodon client
Most downloaded Android Connectivity
- 1 DCC++Throttle 1.5.2065 Application to drive DCC-EX command station via Bluetooth
- 2 evcc - solar charging 1.7.1 charge your EV when the sun is shining or electricity is cheap and clean
- 3 Pixel 5G 3.1.1 Change the 5G NR mode and enable VoLTE on rooted Pixel phones
-
4
xlog2 0.6.10
Peer-to-peer amateur-radio field logbook that syncs with the xlog2 desktop
-
5
RemotePhone 2.2.0
Mirror and control your Android phone from Linux over WiFi
- 6 Flashbyte 3.1.4 A fast cross-platform file sharing app.
-
7
Meshtastic 2.8.4
The official app for Meshtastic, an open-source, off-grid, mesh radio.
-
8
ekklesia — Direct Democracy 1.0.37
Anonymous civic participation for Greek citizens
-
9
Network Survey 2.0
Survey cellular, Wi-Fi, Bluetooth and GNSS, then log, stream or upload the data
-
10
WolLight 1.0.8
Wake-on-LAN app with device list, LAN scan and stale-IP recovery. LAN-only.